Journal of Applied Science and Engineering

Published by Tamkang University Press

1.30

Impact Factor

2.10

CiteScore

Volume 18, Issue 4

3D stratum models obtained using the modified butterfly subdivision algorithm. (a) 3D stratum model established directly based on drilling data. (b) 3D stratum model obtained after processing twice with the modified butterfly subdivision technique.

Construction and Application of 3D Geological Models for Attribute-oriented Information Expression

The adsorption tendency of aqueous As(III) and As (V) on Gueiren soil at room temperature.

Arsenic of Adsorption Characteristics in Taiwan Soils

Graphical user interface with manual and autonomous modes.

A Novel Vision Based Protocol for Controlling Flapping Wing Vehicles in Indoor Surveillance Mission

The stamp die for forming the metal endcap with dome-shaped cavities.

Experimental Study on Electromechanical Performances of Two Kinds of the Integral Arrayed Cymbal Harvesters

Four types of commonly used flexure hinges.

Optimization Design of Flexible Micro-Displacement Amplification Mechanism Based on Parameters

A Stephenson type III six-bar linkage.

Kinematic Analysis of a Flapping-wing Micro-aerial-vehicle with Watt Straight-line Linkage

(a) Leg mechanism; (b) Schematic of the leg mechanism.

Squat and Standing Motion of a Single Robotic Leg Using Pneumatic Artificial Muscles

Sources of the review materials.

Power Quality Issues, Solutions and Standards: A Technology Review

Experimental environment of signal transmission through human body.

Intra-body Communication Modem on FPGA with AHB-Lite Bus Interface

Synthetic route of the silica nanoparticles modified both by 13F and MSMA.

Preparation of Highly Transparent 13F-Modified Nano-Silica/Polymer Hydrophobic Hard Coatings on Plastic Substrates

False data injection attack.

Edge Marking Strategy Based on Two-Hop Neighbor Information for Wireless Sensor Networks

3-party PAKE.