Zhifang Lu1 and Lin Yang2This email address is being protected from spambots. You need JavaScript enabled to view it.
1School of Mechanical and Electrical Engineering, Hubei Science and Technology College, Wuhan 430074, China
2Department of Smelting, WISDRI Wuhan Iron and Steel Design and Research Institute Incorporation Limited, Wuhan 430083, China
Received: January 22, 2024 Accepted: April 9, 2024 Publication Date: May 23, 2024
Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.
As an important technology in the field of machine manufacturing, metal riveting has been widely used in industrial manufacturing. However, in industrial production, the riveted structure is sometimes unstable, deformation, falling off and other dangerous situations, resulting in the failure of the riveted structure, which seriously endanger the life safety of employees. In this study, the riveted structure is modeled and failure analyzed by finite element analysis, and the deformation prediction model is constructed by finite element analysis of local elements of riveted structure. Firstly, the study conducts a small element modeling of riveted structures using finite element analysis methods, and conducts failure analysis of riveted structures based on multi angle rivet load displacement experiments. Afterwards, the layered mapping equivalent model is used to predict the deformation of the riveted structure after local element analysis, and the effectiveness of the prediction model is verified through finite element simulation. The study conducts relevant cases, and the results shows that the total error of the failure displacement of the riveted structure model is basically less than 10%, and the overall simulation results are good; The average stress of the riveting deformation prediction model is 490 MPa, and the detection effect is good. Therefore, the riveting structure model and deformation prediction model constructed in the study have good performance, which helps workers to timely handle risk factors and improve the safety of mechanical manufacturing.
Keywords: Rivet; Riveted structure; Stress; Plastic deformation; Finite element
[1] D. Liu, H. Chai, Z. Huang, Z. Guo, and Y. Bai, (2021) “Multi-Field Model of Dual-Coil Electromagnetic Riveting and Riveted Streamline Feature with Annealed 7075 Aluminum Alloy" Journal of Materials Engineering and Performance 30: 5568–5577. DOI: 10.1007/s11665-021-05831-z.
[2] A. Mohabeddine, J. Correia, J. Castro, P. Montenegro, A. De Jesus, and R. Calçada, (2021) “Numerical investigation on the fatigue life of non-cracked metallic plates repaired with bonded CFRP" ce/papers 4: 1135–1144. DOI: 10.1002/cepa.1405.
[3] T. Zhao, S. Li, Y. Wang, H. Wang, M. Zhang, X. Tang, F. Liu, D. Du, H. Zheng, and Y. Ma, (2021) “Riveting the atomically distributed lithiophilic centers in the CNTreinforced interfacial layer: an ultrathin, light-weight deposition substrate toward superior Li utilization" Journal of Materials Chemistry A 37: 21281–21290. DOI: 10.1039/D1TA04741H.
[4] J. F. Valera-Jiménez, G. Burgueño-Barris, S. GómezGonzález, J. López-López, E. Valmaseda-Castellón, and E. Fernández-Aguado, (2020) “Finite element analysis of narrow dental implants" Dental materials 36: 927–935. DOI: 10.1016/j.dental.2020.04.013.
[5] C. Ma, R. Scheichl, and T. Dodwell, (2022) “Novel design and analysis of generalized finite element methods based on locally optimal spectral approximations" SIAM Journal on Numerical Analysis 60: 244–273. DOI: 10.1016/j.apenergy.2021.117766.
[6] H. Bolandi, X. Li, T. Salem, V. N. Boddeti, and N. Lajnef, (2022) “Bridging finite element and deep learning: High-resolution stress distribution prediction in structural components" SIAM Journal on Numerical Analysis 16: 1365–1377. DOI: 10.1007/s11709-022-0882-5.
[7] J. A. N. Figueira and L. G. Trabasso, (2022) “Riveting Squeezing Force Estimation: A Revised Algebraic Model" Journal of Aircraft 59: 1005–1019. DOI: 10.2514/1. C036635.
[8] C. V. Zanatta, E. Villani, J. M. G. de Mello, and J. A. N. Figueira, (2022) “Riveting process simulation to predict induced deformations in aeronautical structures" The International Journal of Advanced Manufacturing Technology 120: 7673–7687. DOI: 10.1007/s00170- 022-09247-4.
[9] P. Zamani and K. Farhangdoost, (2020) “On the Influence of riveting process parameters on fatigue life of riveted lap joint" Journal of applied and computational mechanics 6: 248–258. DOI: 10.22055/JACM.2019.28827.1507.
[10] S. Ji, X. Cui, L. Ma, H. Liu, Y. Zuo, and Z. Zhang, (2023) “Achieving high-quality aluminum to copper dissimilar metals joint via friction stir double-riveting welding" Acta Metallurgica Sinica (English Letters) 36: 552–572. DOI: 10.1007/s40195-022-01512-5.
[11] J. Wu and C. Chen, (2022) “Experimental investigation of high impact polystyrene/metal self-piercing riveted joint" Polymers for Advanced Technologies 33: 2221–2230. DOI: 10.1002/pat.5673.
[12] C. Song, B. Xing, X. He, and S. Wang, (2021) “Selfpiercing riveting for single-strap butt joints in similar aluminium alloys" Science and Technology of Welding and Joining 26: 301–308. DOI: 10.1080/13621718.2021.19059.
[13] A. Mohamad, Z. Qasim, Q. Zhaoye, S. Babak, and A. Mohammed, (2020) “Finite element analysis of natural fibers composites: A review" Nanotechnology Reviews 9: 853–875. DOI: 10.1515/ntrev-2020-0069.
[14] N. Kardani, A. Zhou, M. Nazem, and S.-L. Shen, (2021) “Improved prediction of slope stability using a hybrid stacking ensemble method based on finite element analysis and field data" Journal of Rock Mechanics and Geotechnical Engineering 13: 188–201. DOI: 10.1016/j.jrmge.2020.05.011.
[15] H. Chen, D. Fan, J. Huang, W. Huang, G. Zhang, and L. Huang, (2020) “Finite element analysis model on ultrasonic phased array technique for material defect time of flight diffraction detection" Science of Advanced Materials 12: 665–675. DOI: 10.1166/sam.2020.3689.
[16] H. M. Numano˘glu, H. Ersoy, B. Akgöz, and Ö. Civalek, (2022) “A new eigenvalue problem solver for thermo-mechanical vibration of Timoshenko nanobeams by an innovative nonlocal finite element method" Mathematical Methods in the Applied Sciences 45: 2592– 2614. DOI: 10.1002/mma.7942.
[17] A. B. Andhumoudine, X. Nie, Q. Zhou, J. Yu, O. I. Kane, L. Jin, and R. R. Djaroun, (2021) “Investigation of coal elastic properties based on digital core technology and finite element method" Advances in Geo-Energy Research 5: 53–63. DOI: 10.46690/ager.2021.01.06.
[18] M. Alipour, M. A. Torabi, M. Sareban, H. Lashini, E. Sadeghi, A. Fazaeli, M. Habibi, and R. Hashemi, (2020) “Finite element and caseal method for analyzing the effects of martensite morphologies on the formability of DP steels" Mechanics Based Design of Structures and Machines 48: 525–541. DOI: 10.1080/15397734.2019.1633343.
[19] K. Diao, X. Sun, G. Lei, Y. Guo, and J. Zhu, (2020) “Multiobjective system level optimization method for switched reluctance motor drive systems using finiteelement model" IEEE Transactions on Industrial Electronics 67: 10055–10064. DOI: 10.1109/TIE.2019.2962483.
[20] Z. Zhang and C. Sun, (2021) “Structural damage identification via physics-guided machine learning: a methodology integrating pattern recognition with finite element model updating" Structural Health Monitoring 20: 1675–1688. DOI: 10.1177/147592172092748.
[21] T. Shen, B. Zhao, C. Wang, Y. Xiao, Y. Han, G. Zhao, and J. Ke, (2020) “Efficacy of different designs of mandibular expanders: A 3-dimensional finite element study" American Journal of Orthodontics and Dentofacial Orthopedics 157: 641–650. DOI: 10.1016/ j.ajodo.2019.05.019.
[22] P. Liu and J. Sun, (2022) “A new simple method to conveniently measure the open porosity of porous metal foams with reticular structure" Multidiscipline modeling in materials and structures 18: 277–290. DOI: 10.1108/MMMS-11-2021-0175.
[23] A. Cortona, G. Rossini, S. Parrini, A. Deregibus, and T. Castroflorio, (2020) “Clear aligner orthodontic therapy of rotated mandibular round-shaped teeth: a finite element study" The Angle Orthodontist 90: 247–254. DOI: 10.2319/020719-86.1.
[24] N. Acharya, (2021) “Finite Element Analysis on the Hydrothermal Pattern of Radiative Natural Convective Nanofluid Flow Inside a Square Enclosure Having Nonuniform Heated Walls" Heat Transfer 51: 323–354. DOI: 10.1002/htj.22309.
[25] M. Uyaner, M. Kara, Y. Kepir, and A. Gunoz, (2023) “Virtual testing of laminated composites subjected to lowvelocity impact" Iranian Journal of Science and Technology, Transactions of Mechanical Engineering 47: 595–610. DOI: 10.1007/s40997-022-00527-8.
[26] L. H. Binh and T.-V. T. Duong, (2021) “Load balancing routing under constraints of quality of transmission in mesh wireless network based on software defined networking" Journal of Communications and Networks 23: 12–22. DOI: 10.23919/JCN.2021.000004.
We use cookies on this website to personalize content to improve your user experience and analyze our traffic. By using this site you agree to its use of cookies.
