Changgao Xia¹,  Chenxi Sun This email address is being protected from spambots. You need JavaScript enabled to view it. ¹, Jiangyi Han¹

¹College of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013, P.R. China

REFERENCES

1. [1] Wei, Q. (2014) Research and design of double-sided high-efficiency hedge trimmer, Guangxi: Guangxi University.
2. [2] Wang, Y. J. (2016) Structural parameters optimization of multi-degree-of-freedom manipulator, Beijing: Beijing Institute of. Technology.
3. [3] Wang, X. W., M. H. Wu, J. Zhou, et al. (2018) Optimization and simulation of structural parameters of manipulators for high-quality tea picking robots, Journal of Chinese Agricultural Mechanization39(7),84-89. doi:10.13733/j.jcam.issn.2095-5553.2018.07.017
4. [4] Tian, H. B., H. W. Ma, and J. Wei(2013) Workspace and structural parameter analysis for manipulator of serial robot, Journal of Agricultural Machinery 44(4),196-201. doi:10. 6041/j.issn.1000-1298.2013.04.034.
5. [5] Salisbury, J. K., and J. J. Craig (1982) Articulated Hands: Force Control and Kinematic Issues, The International Journal of Robotics Research 1(1), 4-17. doi:10.1177/ 027836498200100102
6. [6] Gosselin, C., J. Angeles (1991) A global performance index for the kinematic optimization of robotic manipulators, ASME Journal of Mechanical Design113,220-226. doi:10.1115/ 1.2912772
7. [7] Tang, G. (2018) Research on kinetic characteristics of expressway hedgerow pruning robot, Chongqing: Chongqing Jiaotong University.
8. [8] Liu, Z. Z., H. Y. Liu, Z. Luo, et al. (2013) Improvement on Monte Carlo Method for Robot Workspace Determination, Transactions of the Chinese Society for Agricultural Machiner44(1),230-235. doi:10.6041/j.issn.1000-1298.2013.01.043
9. [9] Ye, R. P. (2016) Research on modeling and simulation of 5-DOF serial manipulator, Shenzhen: Shenzhen University.
10. [10] Pond, G. T., and J. A. Carretero (2007) Quantitative dexterous workspace comparison of parallel manipulators, Mechanism and Machine Theory 42 (10),1388–1400. doi:10.1016/j.mechmachtheory.2006.10.004
11. [11] Qu, M. K., H. B. Wang, and Y. Rong (2017) Design of 6-DOF parallel mechanical leg of wheel-leg hybrid quadruped robot, Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE) 33(11), 29-37. doi:10.11975/j.issn.1002-6819. 2017.11.004
12. [12] Rong, Y., Z. L. Jin, and B. Y. Cui(2012) Configuration analysis and structure parameter design of six-leg agricultural robot with parallel-leg mechanisms, Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE) 28(15), 9-14. doi:10.3969/j.issn.1002-6819.2012.15.002
13. [13] Tsal, L. W., and S. Joshi (2000) Kinematics and optimization of a spatial 3-UPU parallel manipulator, Journal of Mechanical Design 122 (4), 439–446. doi:10.1115/1.1311612
14. [14] Wang, H. F., B. Yin, R. J. Luo, et al. (2019) Mechanism design and kinematics analysis of 4-dof SCARA robot system. Journal of Mechanical & Electrical Engineering 36(12), 1320–1324．doi:10.3969/j.issn.1001-4551.2019.12.017
15. [15] Chaudhury, A. N., and A. Ghosal(2017) Optimum design of multi-degree-of-freedom closed- loop mechanisms and parallel manipulators for a prescribed workspace using Monte Carlo method, Mechanism and Machine Theory 118 ,115-138. doi:10.1016/j. mechmachtheory.2017.07.021
16. [16] Cai, Z., and B. Xie (2015) Robotics. Third Edition, Beijing: Tsinghua University Press, 8-9.
17. [17] Song, J. (2008) Optimization design and simulation of the structural parameters of eggplant picking robot, Mechanical Design & Manufacture (6):166-168.
18. [18] Wei, J. (2013) Design and Research of Hedge Seedling Pruning Manipulator, Guangxi, Guangxi University.
19. [19] Li, H. Z., Z. G. Hu, L. J. Guo, et al. (2014) Simulation study of manipulator with three degree of freedom, Mechanical Design & Manufacture (10):186-189. doi:10.19356/ j. cnki.1001-3997.2014.10.056
20. [20] Fu, Y. D.(2016) The design and research of mechanism and control system of the cucumber harvesting manipulator, Jilin，Jilin University.
21. [21] Kivela, T., J. Mattila, and J. Puura (2017) A generic method to optimize a redundant serial robotic manipulator’s structure, Automation in Construction 81, 172-179.doi:10. 1016/j.autcon.2017.06.006
22. [22] Kucuk, S., Z. Bingul(2003) Robot workspace optimization based on the Global Condition Index, IFAC Automatic Systems for Building the Infrastructure in Developing Countries,117-122.doi:10.1016/S1474-6670(17)35817-2
23. [23] Kumar, V., S. Sen, S. R. Shibendu, et al. (2014) Design Optimization of Serial Link Redundant Manipulator: an approach using global performance metric, 2nd International Conference on Innovations in Automation and Mechatronics Engineering,43-50. doi:10.1016/j.protcy.2014.08.007
24. [24] Lim, H. S., S. W. Hwang, K. S. Shin, et al. (2010) Design Optimization of the robot manipulator based on global performance indices using the grey-based Taguchi method, 5th IFAC Symposium on Mechatronic Systems Marriott Boston Cambridge,285-292. doi:10.3182/20100913-3-us-2015.00078
25. [25] West, C., A. Monatzer, S. D. Monk, et al. (2016) A genetic algorithm approach for parameter optimization of a 7DOF robotic manipulator, International Federation of Automatic Control,1261-1266. doi:10.1016/j.ifacol.2016.07.688
26. [26] Ye, Y., C. B. Yin, Y. Gong, et al. (2017) Position control of nonlinear hydraulic system using an improved PSO based PID controller, Mechanical Systems and Signal Processing 83, 241-259. doi:10.1016/j.ymssp.2016.06.010
27. [27] Cao, Y., H. H. Zang, L. Wu, et al. (2011) An engineering-oriented method for the three dimensional workspace generation of robot manipulator, Journal of Information & Computational Scienc 8(1), 51–61.