Xin Li This email address is being protected from spambots. You need JavaScript enabled to view it.1 and Xin Gao2
1School of New Energy and Power Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China 2School of Automation and Electrical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
Received: October 22, 2020 Accepted: January 17, 2021 Publication Date: August 1, 2021
Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.
In order to meet the application requirements of inductively coupled power transmission systems in mobile high-power equipment, the structure of dual pickup coils can be used to increase the output power of the system. The mobile dual pickups ICPT system has the characteristics that the output voltage varies greatly and the signal is easily interfered during the movement. A mobile dual pickups ICPT system based on the LCL compensation network is designed. The method of adding a buck-boost circuit on the secondary side is used to regulate the output voltage. On the basis of establishing the small-signal model of the Buck-boost circuit, a proportional-integral-differential (PID) controller and a fuzzy PID controller are designed. In the MATLAB simulation platform, the voltage stabilizing effect of the PID controlled mobile dual-pick ICPT system and the fuzzy PID controlled mobile dual-pick ICPT system are compared. The simulation results show that the fuzzy PID-controlled mobile dual pickups ICPT system has faster response speed and smaller overshoot.
Keywords: ICPT, mobile, LCL compensation network, Voltage regulator control
REFERENCES
[1] Su Y. Choi, Beom W. Gu, Seog Y. Jeong, and Chun T. Rim. Advances in wireless power transfer systems for roadway-powered electric vehicles. IEEE Journal of Emerging and Selected Topics in Power Electronics, 3(1):18– 36, 2015.
[2] Guoxing Wang, Wentai Liu, Mohanasankar Sivaprakasam, and Gurhan Alper Kendir. Design and analysis of an adaptive transcutaneous power telemetry for biomedical implants. IEEE Transactions on Circuits and Systems I: Regular Papers, 52(10):2109–2117, 2005.
[3] Zhengming Zhao, Yiming Zhang, and Kainan Chen. New progress of magnetically-coupled resonant wireless power transfer technology. Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 33(3):1–13, 2013.
[4] Grant A. Covic and John T. Boys. Inductive power transfer. Proceedings of the IEEE, 101(6):1276–1289, 2013.
[5] Y. Li, R. K. Mai, and L. S. Ma. Inductive power transmission system with dual primary coils and its power distribution method. Proceedings of the CSEE, 35(17):4454– 4460, 2015.
[6] Boyune Song, Jaegue Shin, Seokhwan Lee, Seungyong Shin, Yangsu Kim, Sungjeub Jeon, and Guho Jung. Design of a high power transfer pickup for On-Line Electric Vehicle (OLEV). 2012 IEEE International Electric Vehicle Conference, IEVC 2012, 2012.
[7] Limin Huang, Yanling Li, Zhengyou He, Shiping Gao, and Jin Yu. Improved robust controller design for dynamic IPT system under mutual-inductance uncertainty. IEEE WoW 2015 - IEEE PELS Workshop on Emerging Technologies: Wireless Power, Proceedings, 2015.
[8] Xin Gao and Xin Li. Transmission characteristics of the mobile inductively coupled power transfer system for dual transmitters and pickups based on PSpice. Archives of Electrical Engineering, 69(1):147–157, 2020.
[9] Y. Y. Geng, Z. P. Yang, F. Lin, and J.C. Wang. Characteristic Analysis of Multiple-Receiving Coupling Coils Mode for Wireless Power Transfer Systems. Transactions of China Electrotechnical Society, 32(2):1–9, 2017.
[10] Ailong Zou, Huizhen Wang, and Jie Hua. The movable ICPT system with multi-loads based on the lcl compensation circuit. Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 34(24):4000–4006, 2014.
[11] C. Hou, W. Zhu, H.Q. Shui, D.S. Yu, and Z.L. Xia. Characteristics Analysis of Constant Current and Constant Voltage Wireless Charging System for Multiple Electric Vehicles Based on LCL-LC / LCL Hybrid Compensation. Advanced Technology of Electrical Engineering and Energy, 37(11):58–68, 2018.
[12] B. Luo, L.H. Chen, and Y. Li. Research on Output Voltage Control of Induction Exchanged Power Transmission System Based on Sliding Mode Control. Transactions of China Electrotechnical Society, 32(23):235–242, 2017.
[13] X. X. Yan, Y.D. Yi, and Z.Z. Zhao. Constant output voltage of multi-transmitted wireless power transfer. Information Technology, 2:153–155, 2019.
[14] S. Luo. Study on the Strategy of Output Control for Multipickup ICPT System. PhD thesis, Chongqing University, China, 2014.
[15] C. L Dai and X. Dai. Output Optimization Control Strategy for Wireless Power Transfer System with Multiple Pickups Using Knapsack Algorithm. Journal of University of Electronic Science and Technology of China, 47(4):526–531, 2018.
[16] T. Zhang. Research on Receiver Voltage Regulating Strategy of Dynamic Load ICPT System. PhD thesis, Anhui University of Science and Technology, China, 2017.
[17] L. Wang. Research on Transmitting Terminal Current Control Strategy of Multi-load ICPT System. PhD thesis, Anhui University of Science and Technology, China, 2016.
[18] J. G. Kuang, Y. Liu, and R. H. Zhang. Simulation and Research of DC-DC Converters Based on a Novel Fuzzy-PID Control. Modern Machinery, 4:66–70, 2012.
[19] S. T Liang and H. Shen. Design and Simulation of the Fuzzy Control System of a Buck Converter. Marine Electric & Electronic Engineering, 39(4):14–17, 2019.
[20] Y. Liang, L.Z. Zhao, Y.C. Zhang, Z. J. Ren, and Y. Jin. A new mobile power supply design based on adaptive fuzzy PID control. Chinese Journal of Power Sources, 38(4):752–754, 2014.
[21] J Huh, S. W. Lee, W. Y. Lee, G. H. Cho, and C. T. Rim. Narrow-width inductive power transfer system for online electrical vehicles. IEEE Transactions on Power Electronics, 26(12):3666–3679, 2011.
[22] H. Q. Mo, H. J. Tang, and J. Y. Lan. Design of Wireless Power Transmission System Based on LCL-SS Resonant Network. Power Electronics, 49(10):34–37, 2015.
We use cookies on this website to personalize content to improve your user experience and analyze our traffic. By using this site you agree to its use of cookies.