Trong-Phuoc Huynh This email address is being protected from spambots. You need JavaScript enabled to view it.¹ , Dinh-Thang Nguyen² , Thanh-Duy Phan³ , Nguyen-Trong Ho⁴ , Phuong-Trinh Bui^5,6, and May Huu Nguyen^7,8

¹Department of Civil Engineering, College of Engineering Technology, Can Tho University, Campus II, 3/2 St., Ninh Kieu Dist., Can Tho City 900000, Vietnam
²School of Graduate, Can Tho University, Campus II, 3/2 St., Ninh Kieu Dist., Can Tho City 900000, Vietnam
³Department of Civil Engineering, Faculty of Engineering at Kamphaeng Saen, Kasetsart University, Malaiman Rd., Kamphaeng Saen Dist., Nakhon Pathom City 73140, Thailand
⁴Faculty of Civil Engineering, VSB – Technical University of Ostrava, Ludvíka Podéšte 1875/17, 708 00 Ostrava-Poruba, Czech Republic
⁵Department of Construction Materials, Faculty of Civil Engineering, Ho Chi Minh City University of Technology (HCMUT), 268 Ly Thuong Kiet Street, District 10, Ho Chi Minh City, Vietnam
⁶Vietnam National University Ho Chi Minh City, Linh Trung Ward, Thu Duc District, Ho Chi Minh City, Vietnam
⁷Civil and Environmental Engineering Program, Graduate School of Advanced Science and Engineering, Hiroshima University, 1-4-1, Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8527, Japan
⁸Department of Bridge and Tunnel, Faculty of Civil Engineering, University of Transport Technology, 54 Trieu Khuc, Thanh Xuan, Hanoi 100000, Vietnam

REFERENCES

1. [1] P Novak, AIB Moffat, C Nalluri, and R Narayanan. Hydraulic Structures: Fourth Edition. 2007.
2. [2] Zhongru Wu, Ji Li, Chongshi Gu, and Huaizhi Su. Review on hidden trouble detection and health diagnosis of hydraulic concrete structures. Science in China, Series E: Technological Sciences, 50:34–50, 2007.
3. [3] Yi Li, Mingyue Wan, Jiming Du, Li Lin, Wei Cai, and Longfei Wang. Microbial enhanced corrosion of hydraulic concrete structures under hydrodynamic conditions: Microbial community composition and functional prediction. Construction and Building Materials, 248, 2020.
4. [4] Yarong Song, Yimei Tian, Xuan Li, Jing Wei, Haiya Zhang, Philip L. Bond, Zhiguo Yuan, and Guangming Jiang. Distinct microbially induced concrete corrosion at the tidal region of reinforced concrete sewers. Water Research, 150:392–402, 2019.
5. [5] Julia A. Maresca, Paul Moser, and Thomas Schumacher. Analysis of bacterial communities in and on concrete. Materials and Structures, 50(1), 2017.
6. [6] P. Kumar Mehta and Richard W. Burrows. Building durable structures in the 21st century. Indian Concrete Journal, 75(7):437–443, 2001.
7. [7] R. S. Olivito, O. A. Cevallos, and A. Carrozzini. Development of durable cementitious composites using sisal and flax fabrics for reinforcement of masonry structures. Materials and Design, 57:258–268, 2014.
8. [8] Jahangir Mirza, Benoit Durand, Aamer R. Bhutta, and Mahmood M. Tahir. Preferred test methods to select suitable surface repair materials in severe climates. Construction and Building Materials, 50:692–698, 2014.
9. [9] Romy S Edwin, Mieke De Schepper, Elke Gruyaert, and Nele De Belie. Effect of secondary copper slag as cementitious material in ultra-high performance mortar. Construction and Building Materials, 119:31–44, 2016.
10. [10] Jixiang Wang, Tianyong Huang, Guodong Cheng, Ze Liu, Siqi Li, and Dongmin Wang. Effects of fly ash on the properties and microstructure of alkali-activated FA/BFS repairing mortar. Fuel, 256, 2019.
11. [11] Rafael Robayo-Salazar, Carlos Jesús, Ruby Mejía de Gutiérrez, and F. Pacheco-Torgal. Alkali-activated binary mortar based on natural volcanic pozzolan for repair applications. Journal of Building Engineering, 25, 2019.
12. [12] Hui Zhao, Wei Sun, Xiaoming Wu, and Bo Gao. The properties of the self-compacting concrete with fly ash and ground granulated blast furnace slag mineral admixtures. Journal of Cleaner Production, 95:66–74, 2015.
13. [13] Erdoan Özbay, Mustafa Erdemir, and Halil Ibrahim Durmu¸s. Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review. Construction and Building Materials, 105:423–434, 2016.
14. [14] Trong Phuoc Huynh, Duy Hai Vo, and Chao Lung Hwang. Engineering and durability properties of ecofriendly mortar using cement-free SRF binder. Construction and Building Materials, 160:145–155, 2018.
15. [15] Chao Lung Hwang, Duy Hai Vo, and Trong Phuoc Huynh. Physical–microstructural evaluation and sulfate resistance of no-cement mortar developed from a ternary binder of industrial by-products. Environmental Progress and Sustainable Energy, 39(5), 2020.
16. [16] Li Jianyong and Tian Pei. Effect of slag and silica fume on mechanical properties of high strength concrete. Cement and Concrete Research, 27(6):833–837, 1997.
17. [17] Svetlana Pushkar. The effect of additional byproducts on the environmental impact of the production stage of concretes containing bottom ash instead of sand. Sustainability, 11(18), 2019.
18. [18] TCVN10302:2014. Activity admixture - Fly ash for concrete, mortar and cement. Ministry of Science and Technology, Vietnam. (in Vietnamese), 2014.
19. [19] ASTMC618. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM International, West Conshohocken, PA, 2019.
20. [20] Ana Fernández-Jiménez and A Palomo. Mid-infrared spectroscopic studies of alkali-activated fly ash structure. Microporous and mesoporous materials, 86(1-3):207– 214, 2005.
21. [21] Ghasan Fahim Huseien, Abdul Rahman Mohd Sam, Kwok Wei Shah, Mohammad Ali Asaad, Mahmood Md Tahir, and Jahangir Mirza. Properties of ceramic tile waste based alkali-activated mortars incorporating GBFS and fly ash. Construction and Building Materials, 214:355–368, 2019.
22. [22] TCVN3121–2:2003. Mortar for masonry - Test methods Part 2: Sampling and preparation of specimens. Ministry of Science and Technology, Vietnam. (in Vietnamese), 2003.
23. [23] ASTM109. Standard test method for compressive strength of hydraulic cement mortars (using 2 in. or [50 mm] cube specimens). ASTM International, West Conshohocken, PA, 2020.
24. [24] TCVN3121–11:2003. Mortar for masonry - Test methods Part 11: Determination of flexural and compressive strength of hardened mortars. Ministry of Science and Technology, Vietnam. (in Vietnamese), 2003.
25. [25] ASTMC597. Standard test method for pulse velocity through concrete. ASTM International, West Conshohocken, PA, 2016.
26. [26] ASTMC1202. Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration. ASTM International, West Conshohocken, PA, 2019.
27. [27] Richard J Kessler, Rodney G Powers, and M A Paredes. Resistivity measurements of water saturated concrete as an indicator of permeability. Proceedings of the Corrosion, 2005.
28. [28] Chao Lung Hwang, Le Anh Tuan Bui, Kae Long Lin, and Chun Ting Lo. Manufacture and performance of lightweight aggregate from municipal solid waste incinerator fly ash and reservoir sediment for selfconsolidating lightweight concrete. Cement and Concrete Composites, 34(10):1159–1166, 2012.
29. [29] M Schneider, M Romer, M Tschudin, and H. Bolio. Sustainable cement production-present and future. Cement and Concrete Research, 41(7):642–650, 2011.
30. [30] Idawati Ismail, Susan A. Bernal, John L. Provis, Rackel San Nicolas, Sinin Hamdan, and Jannie S.J. Van Deventer. Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash. Cement and Concrete Composites, 45:125–135, 2014.
31. [31] Watcharapong Wongkeo, Pailyn Thongsanitgarn, Athipong Ngamjarurojana, and Arnon Chaipanich. Compressive strength and chloride resistance of selfcompacting concrete containing high level fly ash and silica fume. Materials and Design, 64:261–269, 2014.
32. [32] Sinan Caliskan. Aggregate/mortar interface: Influence of silica fume at the micro- and macro-level. Cement and Concrete Composites, 25(4-5 SPEC):557–564, 2003.
33. [33] N. Bouzoubaâ, M. H. Zhang, and V. M. Malhotra. Mechanical properties and durability of concrete made with high-volume fly ash blended cements using a coarse fly ash. Cement and Concrete Research, 31(10):1393– 1402, 2001.
34. [34] Arnon Chaipanich, Rattiyakorn Rianyoi, and Thanongsak Nochaiya. The effect of carbon nanotubes and silica fume on compressive strength and flexural strength of cement mortars. Materials Today: Proceedings, 4(5):6065–6071, 2017.
35. [35] S Bhanja and B Sengupta. Influence of silica fume on the tensile strength of concrete. Cement and concrete research, 35(4):743–747, 2005.
36. [36] Xiaoying Xu, Xujian Lin, Xiaoxin Pan, Tao Ji, Yongning Liang, and Hongru Zhang. Influence of silica fume on the setting time and mechanical properties of a new magnesium phosphate cement. Construction and Building Materials, 235, 2020.
37. [37] Zemei Wu, Caijun Shi, and K H Khayat. Influence of silica fume content on microstructure development and bond to steel fiber in ultra-high strength cementbased materials (UHSC). Cement and Concrete Composites, 71:97–109, 2016.
38. [38] Mouhcine Benaicha, Xavier Roguiez, Olivier Jalbaud, Yves Burtschell, and Adil Hafidi Alaoui. Influence of silica fume and viscosity modifying agent on the mechanical and rheological behavior of self compacting concrete. Construction and Building Materials, 84:103– 110, 2015.
39. [39] Mahdi Valipour, Farhad Pargar, Mohammad Shekarchi, and Sara Khani. Comparing a natural pozzolan, zeolite, to metakaolin and silica fume in terms of their effect on the durability characteristics of concrete: A laboratory study. Construction and Building Materials, 41:879–888, 2013.
40. [40] N Flores Medina, G Barluenga, and Francisco Hernández-Olivares. Combined effect of polypropylene fibers and silica fume to improve the durability of concrete with natural pozzolans blended cement. Construction and Building Materials, 96:556–566, 2015.
41. [41] Punnaman Norrarat, Weerachart Tangchirapat, Smith Songpiriyakij, and Chai Jaturapitakkul. Evaluation of Strengths from Cement Hydration and Slag Reaction of Mortars Containing High Volume of Ground River Sand and GGBF Slag. Advances in Civil Engineering, 2019, 2019.
42. [42] V. M. Malhotra. Testing hardened concrete: Nondestructive methods. ACI Monograph No. 9, ACI. Iowa State University Press, Ames, Iowa., 1976.
43. [43] Zoubeir Lafhaj, Marc Goueygou, Assia Djerbi, and Mariusz Kaczmarek. Correlation between porosity, permeability and ultrasonic parameters of mortar with variable water / cement ratio and water content. Cement and Concrete Research, 36(4):625–633, 2006.
44. [44] Pejman Azarsa and Rishi Gupta. Electrical Resistivity of Concrete for Durability Evaluation: A Review. Advances in Materials Science and Engineering, 2017, 2017.
45. [45] Chao-Lung Hwang and Vu-An Tran. Engineering and Durability Properties of Self-Consolidating Concrete Incorporating Foamed Lightweight Aggregate. Journal of Materials in Civil Engineering, 28(9):04016075, 2016.
46. [46] ASTMC1202. Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration. ASTM International, West Conshohocken, PA., 2019.
47. [47] Xuemei Liu, Kok Seng Chia, and Min Hong Zhang. Water absorption, permeability, and resistance to chloride-ion penetration of lightweight aggregate concrete. Construction and Building Materials, 25(1):335–343, 2011.