Journal of Applied Science and Engineering

Published by Tamkang University Press

1.30

Impact Factor

2.10

CiteScore

N. Sreenivasalu Reddy This email address is being protected from spambots. You need JavaScript enabled to view it.1, Vishwanath K. C.1 , Satheesha V.1 , Thejaraju R.2 , Karthik Raj N.1 , Manoj M. 1 , Goutham H.1 , and Manjunatha B. S.1

1Department of Mechanical Engineering, Rajarajeswari College of Engineering, Bangalore, 560074, India Affiliated to Visvesvaraya Technological University, Belagavi, Karnataka, India
2Department of Mechanical and Automobile Engineering, CHRIST Deemed to be University, Bangalore, 560074, India


 

Received: August 10, 2020
Accepted: March 23, 2021
Publication Date: August 1, 2021

 Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.


Download Citation: ||https://doi.org/10.6180/jase.202108_24(4).0019  


ABSTRACT


The present work aims to investigate the effect of different configurations of the tube-in-tube helically coiled heat exchanger. Commercial CFD codes were used to predict the fluid flow and heat transfer in a tube-in-tube helical heat exchanger. The model of different configurations of the inner tube has been simulated by varying the Dean number. The numerical results are verified and found to be in good agreement with reported data in the literature. Nusselt Number and friction factor are evaluated for different angular positions. The use of geometry E increases the Nusselt number and friction factor by 19.05% and 16% respectively at a Dean number of 4000 as compared with a circular tube as compared with the circular tube.


Keywords: Heat exchanger; Dean number; Nusselt number; Friction factor


REFERENCES


  1. [1] Michele Ciofalo, Antonino Arini, and Massimiliano Di Liberto. On the influence of gravitational and centrifugal buoyancy on laminar flow and heat transfer in curved pipes and coils. International Journal of Heat and Mass Transfer, 82:123–134, 2015. ISSN 00179310.
  2. [2] Hamid Saffari, Rouhollah Moosavi, Nourooz Mohammad Nouri, and Cheng Xian Lin. Prediction of hydrodynamic entrance length for single and two-phase flow in helical coils. Chemical Engineering and Processing: Process Intensification, 86:9–21, oct 2014. ISSN 02552701.
  3. [3] M. R.H. Nobari, B. Shiniyan, and M. Mirzaei. Mixed convection in a vertical helical annular pipe. International Journal of Heat and Mass Transfer, 73:468–482, 2014. ISSN 00179310.
  4. [4] Liejin Guo, Ziping Feng, and Xuejun Chen. An experimental investigation of the frictional pressure drop of steam-water two-phase flow in helical coils. International Journal of Heat and Mass Transfer, 44(14):2601–2610, 2001. ISSN 00179310.
  5. [5] Liang Zhao, Liejin Guo, Bofeng Bai, Yucheng Hou, and Ximin Zhang. Forced convective boiling heat transfer and pressure drop characteristics of two-phase flow inside a small horizontal helically coiled tubing once-through steam generator. In Proceedings of the ASME Summer Heat Transfer Conference, volume 2003, pages 677–685, 2003. ISBN 0791836940.
  6. [6] Huaiming Ju, Zhiyong Huang, Yuanhui Xu, Bing Duan, and Yu Yu. Hydraulic performance of small bending radius helical coil-pipe. Journal of Nuclear Science and Technology, 38(10):826–831, 2001. ISSN 00223131.
  7. [7] R. C. Xin, A Awwad, Z. F. Dong, M. A. Ebadian, and H. M. Soliman. An investigation and comparative study of the pressure drop in air-water two-phase flow in vertical helicoidal pipes. International Journal of Heat and Mass Transfer, 39(4):735–743, 1996. ISSN 00179310.
  8. [8] R. C. Xin, A. Awwad, Z. F. Dong, and M. A. Ebadian. An experimental study of single-phase and two-phase flow pressure drop in annular helicoidal pipes. International Journal of Heat and Fluid Flow, 18(5):482–488, 1997. ISSN 0142727X.
  9. [9] A. Awwad, R. C. Xin, Z. F. Dong, M. A. Ebadian, and H. M. Soliman. Measurement and correlation of the pressure drop in air-water two-phase flow in horizontal helicoidal pipes. International Journal of Multiphase Flow, 21(4):607– 619, 1995. ISSN 03019322.
  10. [10] A. B. Biswas and S. K. Das. Two-phase frictional pressure drop of gas-non-Newtonian liquid flow through helical coils in vertical orientation. Chemical Engineering and Processing: Process Intensification, 47(5):816–826, may 2008. ISSN 02552701.
  11. [11] Lorenzo Santini, Andrea Cioncolini, Carlo Lombardi, and Marco Ricotti. Two-phase pressure drops in a helically coiled steam generator. International Journal of Heat and Mass Transfer, 51(19-20):4926–4939, sep 2008. ISSN 00179310.
  12. [12] Marco Colombo, Luigi P.M. Colombo, Antonio Cammi, and Marco E. Ricotti. A scheme of correlation for frictional pressure drop in steam-water two-phase flow in helicoidal tubes. Chemical Engineering Science, 123:460– 473, feb 2015. ISSN 00092509.
  13. [13] G. F.C. Rogers and Y. R. Mayhew. Heat transfer and pressure loss in helically coiled tubes with turbulent flow. International Journal of Heat and Mass Transfer, 7(11):1207– 1216, 1964. ISSN 00179310.
  14. [14] X. F. Liu, G. D. Xia, and G. Yang. Experimental study on the characteristics of air-water two-phase flow in vertical helical rectangular channel. International Journal of Multiphase Flow, 73:227–237, jul 2015. ISSN 03019322.
  15. [15] Yuichi Murai, Shinji Yoshikawa, Shin Ichi Toda, Masa Aki Ishikawa, and Fujio Yamamoto. Structure of air-water two-phase flow in helically coiled tubes. Nuclear Engineering and Design, 236(1):94–106, jan 2006. ISSN 00295493.
  16. [16] J S Jayakumar, S M Mahajani, J C Mandal, P K Vijayan, and Rohidas Bhoi. Experimental and CFD estimation of heat transfer in helically coiled heat exchangers. Chemical Engineering Research and Design, 86(3):221–232, 2008. ISSN 02638762.
  17. [17] Changzhao Pan, Yuan Zhou, and Junjie Wang. CFD study of heat transfer for oscillating flow in helically coiled tube heat-exchanger. Computers and Chemical Engineering, 69:59–65, oct 2014. ISSN 00981354.
  18. [18] Khashayar Sharifi, Morteza Sabeti, Mehdi Rafiei, Amir H. Mohammadi, and Laleh Shirazi. Computational fluid dynamics (CFD) technique to study the effects of helical wire inserts on heat transfer and pressure drop in a double pipe heat exchanger. Applied Thermal Engineering, 128:898–910, 2018. ISSN 13594311.
  19. [19] Hyung Ju Lee, Jaiyoung Ryu, and Seong Hyuk Lee. Influence of perforated fin on flow characteristics and thermal performance in spiral finned-tube heat exchanger. Energies, 12(3), feb 2019. ISSN 19961073.
  20. [20] Vimal Kumar, Supreet Saini, Manish Sharma, and K. D.P. Nigam. Pressure drop and heat transfer study in tube-intube helical heat exchanger. Chemical Engineering Science, 61(13):4403–4416, jul 2006. ISSN 00092509.
  21. [21] M. A. Omara and Mohamed A. Abdelatief. Experimental study of heat transfer and friction factor inside elliptic tube fixed with helical coils. Applied Thermal Engineering, 134:407–418, apr 2018. ISSN 13594311.
  22. [22] S. K. Naghibzadeh, M. R. Hajmohammadi, and M. SaffarAvval. Heat transfer enhancement of a nanofluid in a helical coil with flattened cross-section. Chemical Engineering Research and Design, 146:36–47, jun 2019. ISSN 02638762.
  23. [23] S. W. Chang, P. S. Wu, W. L. Cai, and J. H. Liu. Turbulent flow and heat transfer of helical coils with twisted section. Applied Thermal Engineering, 180, nov 2020. ISSN 13594311.