Analytical and numerical solutions of flow in and around a fracture within a porous media: Application to equivalent permeability estimation

An Hai  Nguyen

doi:10.6180/jase.202408_27(8).0013

Analytical and numerical solutions of flow in and around a fracture within a porous media: Application to equivalent permeability estimation

$Analytical and numerical solutions of flow in and around a fracture within a porous media: Application to equivalent permeability estimation$

An Hai NguyenThis email address is being protected from spambots. You need JavaScript enabled to view it.

Petrovietnam Exploration Production Corporation - PVEP, Hanoi, Vietnam

Received: June 16, 2023
Accepted: October 16, 2023
Publication Date: November 22, 2023

Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.

Download Citation: ||https://doi.org/10.6180/jase.202408_27(8).0013

Equivalent permeability is the most important parameter to estimate the total flow transported by a fractured geological formation. The inclusion-based effective medium model has been widely used to estimate this parameter. In such an approach, the fracture is assimilated as an elliptical inclusion in which the fluid flow is governed by Darcy’s law. However, experimental investigations have shown that the cubic law is more appropriate to describe the flow in a fracture. This study aims at firstly developing the fluid potential solution of water flow through and around an individual fracture embedded by an infinite geological porous formation under a remote constant pore pressure gradient. Multi-region boundary element method associating to the mass conversation within the fracture is applied to obtain the solution of the water flow through a porous formation containing an individual fracture under a hypersingular integral equation form. Secondly, writing the hypersingular integral equation for the case of superconductive fracture leads to the well-known airfoil equation, and then the closed-form solution of flow within superconductive fracture is rigorously derived. Thirdly, the fluid potential equation is numerically solved for general case of a finite conductive fracture by using boundary integral element method. The comparison between numerical and analytical solution helps to confirm the accuracy of both analytical and numerical development. Fourth, the total flow transported by a fracture is computed and fitted by a function of the fracture conductivity. This numerical solution associating to the self-consistent homogenization scheme engenders an equivalent permeability model, which exhibits a percolation threshold.

Keywords: Equivalent permeability; fractured formation; self-consistent; multi-region boundary element method; hypersingular integral equation; percolation threshold.

[1] T. Nguyen, M. Vu, N. Tran, N. Dao, and D. Pham, (2020) “Stress induced permeability changes in brittle fractured porous rock" International Journal of Rock Mechanics and Mining Sciences 127: 104224. DOI: 10.1016/j.ijrmms.2020.104224.
[2] M. N. Vu. “Modélisation des écoulements dans des milieux poreux fracturés par la méthode des équations aux intégrales singulières". (phdthesis). Université ParisEst, 2012.
[3] D. M. Seyedi, M.-N. Vu, and A. Pouya, (2015) “A two-scale hydromechanical model for fault zones accounting for their heterogeneous structure" Computers and Geotechnics 68: 8–16. DOI: 10.1016/j.compgeo.2015.03.001.
[4] C.-B. Zhou, Y.-F. Chen, R. Hu, and Z. Yang, (2023) “Groundwater flow through fractured rocks and seepage control in geotechnical engineering: Theories and practices" Journal of Rock Mechanics and Geotechnical Engineering 15(1): 1–36. DOI: 10.1016/j.jrmge.2022.10.001.
[5] Z. Yu, Y. Sun, M.-N. Vu, and J.-F. Shao, (2023) “Modeling of Mixed Cracks in Rock-Like Brittle Materials Under Compressive Stresses by a Double-Phase-Field Method" Rock Mechanics and Rock Engineering 56(4): 2779–2792. DOI: 10.1007/s00603-022-03196-w.
[6] G. Corman, M.-N. Vu, and F. Collin, (2022) “Numerical investigation of the couplings between strain localisation processes and gas migrations in clay materials" International Journal of Solids and Structures 256: 111974. DOI: 10.1016/j.ijsolstr.2022.111974.
[7] J. Zhao, (1994) “Geothermal testing and measurements of rock and rock fractures" Geothermics 23(3): 215–231. DOI: 10.1016/0375-6505(94)90001-9.
[8] P. A. Witherspoon, J. S. Wang, K. Iwai, and J. E. Gale, (1980) “Validity of cubic law for fluid flow in a deformable rock fracture" Water resources research 16(6): 1016–1024. DOI: 10.1029/WR016i006p01016.
[9] M. Vu, S. Nguyen, Q. To, and N. Dao, (2017) “Theoretical predicting of permeability evolution in damaged rock under compressive stress" Geophysical Journal International 209(2): 1352–1361. DOI: 10.1093/gji/ggx094.
[10] I. Bogdanov, V. Mourzenko, J.-F. Thovert, and P. Adler, (2003) “Effective permeability of fractured porous media in steady state flow" Water Resources Research 39(1): DOI: 10.1029/2001WR000756.
[11] I. Bogdanov, V. Mourzenko, J.-F. Thovert, and P. Adler, (2007) “Effective permeability of fractured porous media with power-law distribution of fracture sizes" Physical Review E 76(3): 036309. DOI: 10.1103/PhysRevE.76.036309.
[12] V. Mourzenko, J.-F. Thovert, and P. Adler, (2005) “Percolation of three-dimensional fracture networks with power-law size distribution" Physical Review E 72(3): 036103. DOI: 10.1103/PhysRevE.72.036103.
[13] V. V. Mourzenko, J.-F. Thovert, and P. M. Adler, (2011) “Permeability of isotropic and anisotropic fracture networks, from the percolation threshold to very large densities" Physical Review E 84(3): 036307. DOI: 10.1103/ PhysRevE.84.036307.
[14] A. Pouya, M.-N. Vu, S. Ghabezloo, and Z. Bendjeddou, (2013) “Effective permeability of cracked unsaturated porous materials" International Journal of Solids and Structures 50(20-21): 3297–3307. DOI: 10. 1016/j.ijsolstr.2013.05.027.
[15] A. Pouya and M.-N. Vu, (2012) “Numerical modelling of steady-state flow in 2D cracked anisotropic porous media by singular integral equations method" Transport in porous media 93: 475–493. DOI: 10.1007/s11242-012-9968-1.
[16] M.-N. Vu, A. Pouya, and D. M. Seyedi, (2013) “Modelling of steady-state fluid flow in 3D fractured isotropic porous media: application to effective permeability calculation" International Journal for numerical and analytical methods in geomechanics 37(14): 2257–2277. DOI: 10.1002/nag.2134.
[17] M.-N. Vu, A. Pouya, and D. M. Seyedi, (2014) “Theoretical and numerical study of the steady-state flow through finite fractured porous media" International Journal for Numerical and Analytical Methods in Geomechanics 38(3): 221–235. DOI: 10.1002/nag.2200.
[18] M. Vu, S. Nguyen, and M. Vu, (2015) “Modeling of fluid flow through fractured porous media by a single boundary integral equation" Engineering Analysis with Boundary Elements 59: 166–171. DOI: 10.1016/j.enganabound.2015.06.003.
[19] M. Kachanov, (1980) “Continuum model of medium with cracks" Journal of the engineering mechanics division 106(5): 1039–1051.
[20] M. Kachanov, (1992) “Effective elastic properties of cracked solids: critical review of some basic concepts": DOI: 10.1115/1.3119761.
[21] M. Kachanov, (1993) “Elastic solids with many cracks and related problems" Advances in applied mechanics 30: 259–445. DOI: 10.1016/S0065-2156(08)70176-5.
[22] S.-T. Nguyen, Q. D. To, and M. N. Vu, (2017) “Extended analytical solutions for effective elastic moduli of cracked porous media" Journal of Applied Geophysics 140: 34–41. DOI: 10.1016/j.jappgeo.2017.03.007.
[23] T. Nguyen-Sy, A.-M. Tang, Q.-D. To, and M.-N. Vu, (2019) “A model to predict the elastic properties of gas hydrate-bearing sediments" Journal of Applied Geophysics 169: 154–164. DOI: 10.1016/j.jappgeo.2019.05.003.
[24] S. Nguyen, M.-H. Vu, and M. Vu, (2015) “Equivalent porous medium for modeling of the elastic and the sonic properties of sandstones" Journal of Applied Geophysics 120: 1–6. DOI: 10.1016/j.jappgeo.2015.06.004.
[25] T. Nguyen, S. Nguyen, M. Vu, M. Vu, A. Gasser, and A. Rekik, (2016) “Effective viscoelastic properties of micro-cracked heterogeneous materials" International Journal of Damage Mechanics 25(4): 557–573. DOI: 10.1177/1056789515605557.
[26] S. Nguyen, M. Vu, M. Vu, T. Nguyen, A. Gasser, and A. Rekik, (2017) “Generalized Maxwell model for microcracked viscoelastic materials" International Journal of Damage Mechanics 26(5): 697–710.
[27] T. Nguyen-Sy, M.-N. Vu, Q.-D. To, M.-Q. Thai, and T. Nguyen-Thoi, (2019) “On the effective viscoelastic properties of a fractured rock mass" Journal of Applied Geophysics 169: 125–133.
[28] B. Shafiro and M. Kachanov, (2000) “Anisotropic effective conductivity of materials with nonrandomly oriented inclusions of diverse ellipsoidal shapes" Journal of applied physics 87(12): 8561–8569.
[29] M. Vu, S. Nguyen, M. Vu, A. M. Tang, and V. To, (2015) “Heat conduction and thermal conductivity of 3D cracked media" International Journal of Heat and Mass Transfer 89: 1119–1126.
[30] S. T. Nguyen, M.-H. Vu, M. N. Vu, and A. M. Tang, (2017) “Modeling of heat flow and effective thermal conductivity of fractured media: Analytical and numerical methods" Journal of Applied Geophysics 140: 117–122.
[31] S. Nguyen, M.-H. Vu, and M. Vu, (2015) “Extended analytical approach for electrical anisotropy of geomaterials" Journal of Applied Geophysics 123: 211–217.
[32] T. Nguyen-Sy, Q.-D. To, M.-N. Vu, T.-D. Nguyen, and T.-T. Nguyen, (2021) “Predicting the electrical conductivity of brine-saturated rocks using machine learning methods" Journal of Applied Geophysics 184: 104238.
[33] T. Mori and K. Tanaka, (1973) “Average stress in matrix and average elastic energy of materials with misfitting inclusions" Acta metallurgica 21(5): 571–574.
[34] A. N. Norris, (1985) “A differential scheme for the effective moduli of composites" Mechanics of materials 4(1): 1–16.
[35] R. Hill, (1965) “A self-consistent mechanics of composite materials" Journal of the Mechanics and Physics of Solids 13(4): 213–222.
[36] P. N. Sævik, I. Berre, M. Jakobsen, and M. Lien, (2013) “A 3D computational study of effective medium methods applied to fractured media" Transport in porous media 100: 115–142.