Yasmina Ed-Dariy This email address is being protected from spambots. You need JavaScript enabled to view it.¹, Nouzha Lamdour¹, Toufik Cherradi¹, Ancuta Rotaru², Marinela Barbuta², and Petru Mihai²

¹Mohammadia School of Engineers, Mohammed V University of Rabat, Morocco
²Faculty of Civil Engineering and Building Services, “Gheorghe Asachi” Technical University of Iasi, Romania 

REFERENCES

1. [1] M. S. Meddah, and M .Bencheikh, (2009) “Properties of concrete reinforced with different kinds of industrial waste fibre materials” , Construction and Building Materials 23(10), 3196-3205.
2. [2] Jr. H. Savastano, S. F.Santos , M.Radonjic, and  W. O.Soboyejo, (2009) “Fracture and fatigue of natural fiber-reinforced cementitious composites” , Cement and Concrete Composites 31(4), 232-243.
3. [3] Hawileh, R. A., El-Maaddawy, T. A., and Naser, M. Z, (2012) “Nonlinear finite element modeling of concrete deep beams with openings strengthened with externally-bonded composites” , Materials and Design 42, 378-387.
4. [4] Hawileh, R., Abdalla, J. A., and Al-Tamimi, A. K, (2011) “Flexural performance of strengthened RC beams with CFRP laminates subjected to cyclic loading”, In Key Engineering Materials (Vol. 471, pp. 697-702). Trans Tech Publications Ltd.
5. [5] Naser, M., Abu-Lebdeh, G., and Hawileh, R, (2012) “Analysis of RC T-beams strengthened with CFRP plates under fire loading using ANN , ”Construction and Building Materials, 37, 301-309.
6. [6] Naser ,M.Z, Hawileh ,R.A, and Abdalla ., J.A, (2019) “Fiber-reinforced polymer composites in strengthening reinforced concrete structures: A critical review,” Engineering Structures 198,109542.
7. [7] Al Nuaimi, N., Sohail, M. G., Hawileh, R. A., Abdalla, J. A., and Douier, K, (2020) “Durability of Reinforced Concrete Beams Strengthened by Galvanized Steel Mesh-Epoxy Systems under Harsh Environmental Conditions,” Composite Structures, 112547.
8. [8] Nawaz, W., Hawileh, R. A., Saqan, E. I., and Abdalla, J. A, (2016) “Effect of longitudinal carbon fiber-reinforced polymer plates on shear strength of reinforced concrete beams ,” ACI Structural Journal, 113(3).
9. [9] Hawileh,R.A.,Abu-Obeidah,A.,Abdalla,J.A.,and Al-Tamimi,A,(2015) “Temperature effect on the mechanical properties of carbon,glass and carbon-glass FRPlaminates,” Construction and Building Materials 75,342-348.
10. [10] Thakur, V. K., Thakur, M. K., and Gupta, R. K. (2014) “Graft copolymers of natural fibers for green composites,” Carbohydrate polymers 104, 87-93.
11. [11] Khan, J. A., and Khan, M. A. (2015) “The use of jute fibers as reinforcements in composites,” In Biofiber Reinforcements in composite materials , 3-34). Woodhead Publishing.
12. [12] Singh, H., Singh, J. I. P., Singh, S., Dhawan, V., and Tiwari, S. K. (2018) “A brief review of jute fibre and its composites,” Materials Today: Proceedings 5(14), 28427-28437.
13. [13] Gogna, E., Kumar, R., Sahoo, A. K., and Panda, A. (2019) “A comprehensive review on jute fiber reinforced composites,” In Advances in Industrial and Production Engineering  Springer, 459-467.
14. [14] Wei, J., and Meyer, C, (2015) “Degradation mechanisms of natural fiber in the matrix of cement composites ,” Cement and Concrete Research,” 73, 1-16.
15. [15] Alves, C. A. P. S., Dias, A. P. S., Diogo, A. C., Ferrão, P. M. C., Luz, S. M., Silva, A. J., ... and Freitas, M, (2011) “ Eco-composite: the effects of the jute fiber treatments on the mechanical and environmental performance of the composite materials,” Journal of composite materials 45(5), 573-589.
16. [16] Kumar, A., and Srivastava, A, (2017) “ Preparation and mechanical properties of jute fiber reinforced epoxy composites ,” Industrial Engineering & Management 6(4), 1-4.
17. [17] Huang, L., Yan, B., Yan, L., Xu, Q., Tan, H., and Kasal, B, (2016 ) “ Reinforced concrete beams strengthened with externally bonded natural flax FRP plates ,” Composites Part B: Engineering 91, 569-578
18. [18]Cervantes, I., AungYong, L., Chan, K., Ko, Y. F., and Mendez, S, (2014) “Flexural retrofitting of reinforced concrete structures using Green Natural Fiber Reinforced Polymer plates,” In ICSI 2014: Creating Infrastructure for a Sustainable World , 1051-1062.
19. [19] Wang, H., Memon, H., AM Hassan, E., Miah, M., and Ali, M, (2019) “Effect of jute fiber modification on mechanical properties of jute fiber composite,” Materials 12(8), 1226.
20. [20] Zakaria, M., Ahmed, M., Hoque, M. M., and Hannan, A, (2015) “Effect of jute yarn on the mechanical behavior of concrete composites ,” SpringerPlus 4(1), 731.
21. [21] Chakraborty, S., Kundu, S. P., Roy, A., Basak, R. K., Adhikari, B., and Majumder, S. B, (2013) “Improvement of the mechanical properties of jute fibre reinforced cement mortar: A statistical approach ,” Construction and Building Materials 38, 776-784
22. [22] Yan, L., Duchez, A., and Chouw, N, (2013) “Effect of bond on compressive behaviour of flax fibre reinforced polymer tube–confined coir fibre reinforced concrete ,” Journal of Reinforced Plastics and Composites 32(4), 273-285
23. [23] Tan, H., Yan, L., Huang, L., Wang, Y., Li, H., and Chen, J. Y, (2017) “ Behavior of sisal fiber concrete cylinders externally wrapped with jute FRP,” Polymer Composites 38(9), 1910-1917.
24. [24] Sugiman, S., Setyawan, P. D., and Anshari, B, (2020) “ Water Absorption and Impact Strength of Alkali-Treated Bamboo Fiber/Polystyrene-Modified Unsaturated Polyester Composites ,” Journal of Applied Science and Engineering 23(1), 9г20.
25. [25] Dittenber, D. B., and GangaRao, H. V, (2012) “Critical review of recent publications on use of natural composites in infrastructure,” Composites Part A: Applied Science and Manufacturing 43(8), 1419-1429.
26. [26] De, D., Adhikari, B., and De, D, ( 2007) “Grass fiber reinforced phenol formaldehyde resin composite: preparation, characterization and evaluation of properties of composite,” Polymers for advanced technologies 18(1), 72-81.
27. [27] Van de Weyenberg, I., Truong, T. C., Vangrimde, B., and Verpoest, I, (2006) “Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment ,” Composites Part A: Applied Science and Manufacturing 37(9), 1368-1376.
28. [28] El-Abbassi, F. E., Assarar, M., Ayad, R., and Lamdouar, N, (2015) “ Effect of alkali treatment on Alfa fibre as reinforcement for polypropylene based eco-composites: mechanical behaviour and water ageing ,” Composite Structures 133, 451-457.
29. [29] Symington, M. C., Banks, W. M., West, O. D., and Pethrick, R. A, (2009) “ Tensile testing of cellulose based natural fibers for structural composite applications,” Journal of composite materials 43(9), 1083-1108..
30. [30] ASTM, D. 2000. 3039, “ Standard test method for tensile properties of polymer matrix composite materials, ”Annual book of ASTM standards 15, 106-18.
31. [31] ESPCI, C. A, (2005)  Etude des mécanismes d'adhésion à l'interface résine/ciment en vue de la réparation des ouvrages de génie civil (Doctoral dissertation, INSA, Lyon).
32. [32]Sasse, H. R., and Fiebrich, M, (1983) “ Bonding of polymer materials to concrete ,”Rilem/materiaux et constructions 16(94), 293-301.
33. [33]Rokbi, M., Osmani, H., Benseddiq, N., and  Imad, A, (2011) “ On experimental investigation of failure process of woven-fabric composites,” Composites Science and Technology 71(11), 1375-1384.