Xing Zhuo Huang, Qi YangThis email address is being protected from spambots. You need JavaScript enabled to view it., Wei Jia Yan, Yang Tian, and Xun Yang Liang
Shenyang Ligong University, School of Mechanical
Received: December 5, 2023 Accepted: January 7, 2024 Publication Date: February 19, 2024
Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.
In the vehicle leveling system, due to the overall volume is too large and other reasons, the leveling speed is slow, the leveling range is small, and the adjustment stability is insufficient. According to the characteristics of the three-legged parallel robot, this paper designs a new structure which is superior to the traditional hydraulic straight up straight down leg structure, and is superior to the traditional leveling system in both the leveling range and accuracy. The three-point leveling method is selected, and the basic center point leveling algorithm is improved. After the basic leveling operation is completed, the fine adjustment is added to further reduce the position error and improve the leveling precision. At the same time, according to the new structure, the connection between the dynamic and static platform is analyzed, and the linkage module between the leveling platform, the connecting rod and the corresponding slider is established. Then, through the simulation of platform tilt, the data verification is carried out directly with the algorithm results to improve the inspection efficiency.This paper proposes and designs a small vehicle-mounted leveling system with novel structure to solve the problems of the leveling range and the lack of stability of the existing small leveling platform, and completes its structural design, algorithm optimization and algorithm feasibility verification. It is intended to provide a new reference direction for small vehicle leveling system.
[1] M. Taranetz, T. Blazek, T. Kropfreiter, M. K. Müller, S. Schwarz, and M. Rupp, (2015) “Runtime precoding: Enabling multipoint transmission in LTE-advanced system-level simulations" IEEE Access 3: 725–736. DOI: 10.1109/ACCESS.2015.2437903.
[2] R. Tsvetkov, V. Yepin, and A. Shestakov. “Numerical estimation of various influence factors on a multipoint hydrostatic leveling system”. In: IOP Conference Series: Materials Science and Engineering. 208. 1. IOP Publishing. 2017, 012046. DOI: 10.1088/1757- 899X/208/1/012046.
[3] J. Wang, J. Zhao, W. Cai, W. Li, X. Jia, and P. Wei, (2021) “Leveling control of vehicle load-bearing platform based on multisensor fusion" Journal of Sensors 2021: 1–7.
[4] L. Guo, H. Tan, and M. Zeng. “Design of Automatic Leveling Control System for Special Vehiclemounted Platform”. In: 2022 International Conference on Artificial Intelligence and Computer Information Technology (AICIT). IEEE. 2022, 1–5. DOI: 10.1109/AICIT55386.2022.9930164.
[5] S. Lee, J. Kawk, and B. Chu, (2020) “Study of a leveling mobile platform for take-off and landing of unmanned aerial vehicles" Journal of the Korean Society of Manufacturing Process Engineers 19(4): 85–92. DOI: 10.14775/ksmpe.2020.19.04.085.
[6] W. Jianjun, Z. Jingyi, L. Wenlei, C. Wei, and W. Yongchang. “The Study and Engineering Application on Adaptive Leveling of Vehicle Platform”. In: 2019 International Conference on Advances in Construction Machinery and Vehicle Engineering (ICACMVE). IEEE. 2019, 285–290. DOI: 10.1109/ICACMVE.2019.00062.
[7] W. Tan, P. Liu, X. Li, S. Xu, Y. Chen, and J. Yang, (2022) “Segmentation of lung airways based on deep learning methods" IET Image Processing 16(5): 1444–1456. DOI: 10.1049/ipr2.12423.
[8] Z. Zhang, W. Tan, Y. Sun, J. Han, Z. Wang, H. Xue, and R. Wang, (2023) “Self-supervised neural networkbased endoscopic monocular 3D reconstruction method" Health Information Science and Systems 12(1): 4. DOI: 10.1007/s13755-023-00262-7.
[9] D. Li, G. Ma, and J. Li, (2021) “Four-point dynamic leveling method for drilling platform application" Assembly Automation 41(2): 144–154. DOI: 10.1108/AA-02-2020-0021.
[10] L. Tan, B. Wu, V. Sood, D. Xu, M. Narimani, Z. Cheng, and N. R. Zargari, (2017) “A simplified space vector modulation for four-level nested neutral-point clamped inverters with complete control of flying-capacitor voltages" IEEE Transactions on Power Electronics 33(3): 1997–2006. DOI: 10.1109/TPEL.2017.2697847.
[11] R. B. Jiao, C. Chen, M. Yuan, and F. P. Wang, (2014) “The study of automatically leveling control system on electromechanical vehicle stable platform" Applied Mechanics and Materials 494: 266–269. DOI: 10.4028/www.scientific.net/AMM.494-495.266.
[12] A. Liu, J. Wu, F. Zhang, W. Yang, H. Wang, and X. Gang, (2023) “Studies on a statically determinate leveling control strategy for a statically indeterminate four-leg support vehicle-borne platform" Mechanics Based Design of Structures and Machines 51(12): 7131–7148. DOI: 10.1080/15397734.2022.2091593.
[13] K. Iturralde, M. Feucht, D. Illner, R. Hu, W. Pan, T. Linner, T. Bock, I. Eskudero, M. Rodriguez, J. Gorrotxategi, et al., (2022) “Cable-driven parallel robot for curtain wall module installation" Automation in Construction 138: 104235. DOI: 10.1016/j.autcon.2022.104235.
[14] Z. Chong, F. Xie, X.-J. Liu, J. Wang, and H. Niu, (2020) “Design of the parallel mechanism for a hybrid mobile robot in wind turbine blades polishing" Robotics and Computer-Integrated Manufacturing 61: 101857. DOI: 10.1016/j.rcim.2019.101857.
[15] V. L. Nguyen, C.-Y. Lin, and C.-H. Kuo, (2020) “Gravity compensation design of Delta parallel robots using gear-spring modules" Mechanism and Machine Theory 154: 104046. DOI: 10.1016/j.mechmachtheory.2020.104046.
[16] W.-a. Cao, D. Yang, and H. Ding, (2018) “A method for stiffness analysis of overconstrained parallel robotic mechanisms with Scara motion" Robotics and ComputerIntegrated Manufacturing 49: 426–435. DOI: 10.1016/j.rcim.2017.08.014.
[17] E. L. M.E. Lustenkov B.B. Skaryno, (2019) “Selection of an Asynchronous Motor for the Belt Conveyor Drive with a Parallel-Shaft Gearbox" Proceedings of Higher Educational Institutions Machine Building (2 (707)): 3–10.
[18] S. Sawada, K. Kobayashi, H. Okada, and M. Katayama. “Selective transmission of control information based on channel periodicity in PLC-based multiple-machine control”. In: 2017 IEEE International Symposium on Power Line Communications and its Applications (ISPLC). IEEE. 2017, 1–6. DOI: 10.1109/ISPLC.2017.7897109.
[19] G. Madhumitha, R. Srividhya, J. Johnson, and D. Annamalai. “Physical modeling and control of selfbalancing platform on a cart”. In: 2016 International Conference on Robotics: Current Trends and Future Challenges (RCTFC). IEEE. 2016, 1–6. DOI: 10.1109/RCTFC.2016.7893410.
[20] M. X. Gao and J. P. Bai, (2014) “The research of selfbalancing vehicle based on posture sensor system" Applied Mechanics and Materials 599: 735–738. DOI: 10.4028/www.scientific.net/AMM.599-601.735.
[21] I. Krzysztofik, J. Takosoglu, and Z. Koruba, (2017) “Selected methods of control of the scanning and tracking gyroscope system mounted on a combat vehicle" Annual Reviews in Control 44: 173–182. DOI: 10.1016/j.arcontrol.2016.10.003.
[22] J. Xiao, Y. Wang, X. Li, and J. Zheng. “Design of high precision mechatronic-hydraulic leveling system for vehicle-mounted radar”. In: Journal of Physics: Conference Series. 2113. 1. IOP Publishing. 2021, 012041. DOI: 10.1088/1742-6596/2113/1/012041.
[23] C. Lu, D. Huang, Z. Jin, and Y. Huang. “The Research and Design of Auto-leveling Control System for Vehicle-borne Radar Platform Based on AVR”. In: 2006 2nd IEEE/ASME International Conference on Mechatronics and Embedded Systems and Applications. IEEE. 2006, 1–5. DOI: 10.1109/MESA.2006.296949.
We use cookies on this website to personalize content to improve your user experience and analyze our traffic. By using this site you agree to its use of cookies.
